mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Fuel Tank|Specifications|Page 2767 > < Fuel Tank|Specifications|Page 2765
Page 2
background image

Fill And Leveling Hose Connections

8.

Detach the fuel filler hose and leveling hose.

Fuel Tank Mounts

9.

Loosen the two self-locking nuts, that hold the tank in position and remove the two tank bands.

CAUTION:  Insure that there is something in position to restrain the tank from falling prior to removing the tank bands.

10.

Remove the fuel tank.

INSTALLATION
1.

Install the fuel tank, by tightening the self-locking nuts to the tank bands, until the rear end of the tank band contacts the body.

Fuel Hose Connection Specifications

2.

Connect the leveling hose, from the tank, approximately 1.6 in. (40mm) onto the filler neck.

3.

When connecting the filler hose, the end with the shorter straight pipe should be connected to the tank side.

Fuel Tank|Specifications|Page 2767 > < Fuel Tank|Specifications|Page 2765