Eclipse L4-1996cc 2.0L DOHC (1995)
Brake Master Cylinder: Service and Repair
Removal and Installation
1. Drain brake fluid from reservoir.
2. On models equipped with manual transaxle, remove clutch fluid reservoir bracket.
3. Remove battery, relay assembly mounting bolts and washer tank mounting bolts.
4. Remove brake fluid reservoir from mounting bracket, then disconnect brake tubes at master cylinder.
5. Remove bolts securing master cylinder to power booster, then remove cylinder from vehicle.
6. Reverse procedure to install, noting the following:
a. Adjust brake booster pushrod clearance as outlined under Adjustments.
b. Bleed master cylinder and brake system as outlined under Brake System Bleed.