Eclipse L4-1996cc 2.0L DOHC (1995)
Starter Motor: Testing and Inspection
Free Running Test
Free Running Test
1. Place the starter motor in a vise equipped with soft jaws and connect a fully-charged 12 Volt battery as follows:
2. Connect a carbon pile rheostat in series between the battery positive post and starter motor terminal.
3. Connect a voltmeter (15 Volt scale) across the starter motor.
4. Rotate carbon pile to full-resistance position.
5. Connect battery cable from battery negative post to starter motor body.
6. Adjust the rheostat so that a voltmeter indicates Approx. 11 V. If the starter motor turns smoothly, it is OK.
