Eclipse L4-1997cc 2.0L DOHC (1991)
(1) Turn the two sprockets so that their dowel pins are located on top. Then, align the timing marks facing each other with the top surface of the
cylinder head. When you let go of the exhaust camshaft sprocket, it will rotate one tooth in the counterclockwise direction. This should be
taken into account when installing the timing belt on the sprockets.
NOTE: The same camshaft sprocket is used for the intake and exhaust camshafts and is provided with two timing marks. When the sprocket is
mounted on the exhaust camshaft, use the timing mark on the right with the dowel pin hole on top. For the intake camshaft sprocket, use the one on
the left with the dowel pin hole on top.
(2) Align the crankshaft sprocket timing mark.
(3) Align the oil pump sprocket timing mark.
(4) Insert a Phillips screwdriver [shank diameter 8 mm (0.31 in.)] through the hole. If it can be inserted as deep as 60 mm (2.4 in.) or more, the
