Eclipse L4-1997cc 2.0L DOHC (1991)
FUEL RAIL INSTALLATION
Injector Insulators
1.
Install new insulators to the intake manifold.
Injector Seals
2.
Install new grommets and O-rings to the injectors.
3.
Apply unleaded gasoline to the O-ring of the injector.
Injector Installation
4.
While turning the injector to the left and right, install it on to the fuel rail.
5.
Be sure the injector turns smoothly.
NOTE: If it does not turn smoothly, the O-ring may be jammed, remove the injector and re-insert it into the fuel rail. Re-check that the injector
turns smoothly.
Insulator
6.
When installing the fuel rail, check to be sure that the rail insulator is correctly inserted into the installation holes. Tighten the mounting bolts.
Torque value:
7 - 9 ft.lbs. (10 - 13 Nm)
7.
Bolt the fuel pressure regulator to the fuel rail.
Torque value:
6 - 7 ft.lbs. (8 - 10 Nm)