Eclipse L4-1997cc 2.0L DOHC Turbo 16 Valve (1996)
a. Before removing piston rod nut, compress coil spring using suitable coil spring compression tool.
b. While holding piston rod, remove piston rod nut.
4. Reverse procedure to install, noting the following:
a. Using a suitable coil spring, compress and insert coil spring on shock absorber.
Fig. 7 Installing Coil Spring
b. Align edge of coil spring to position as shown, Fig. 20.
Fig. 21 Dust Cover & Cup Installation
c. Fit dust cover over dust cup as shown, Fig. 21.
d. Position upper bracket as shown, then tighten piston nut to specifications.