Eclipse L4-2.4L (4G69) (2008)
Fluid - A/T: Service and Repair
Transmission Fluid Change
TRANSMISSION FLUID CHANGE
If you have an transmission fluid changer, use this changer to replace the transmission fluid. If you do not have an transmission fluid changer, replace
the transmission fluid by the following procedure.
1. Disconnect the hose shown in the illustration which connects the transaxle and the oil cooler (inside the radiator). Place a container under the hose
to collect the discharge.
CAUTION
The engine should be stopped within one minute after it is started. If all the transmission fluid has drained out before then, the engine should
be stopped at that point.
2. Start the engine and let the transmission fluid drain out. (Running conditions: "N" range with engine idling)
Approximately 3.5 dm3 (3.7 quarts) of transmission fluid should be removed.