mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1935 > < Initial Inspection and Diagnostic Overview|Page 1933
Page 211
background image

-

The measured value should be approximately 12 volts (battery positive voltage).

Q: Does the measured voltage correspond with this range?

YES: Go to Step 10.

NO: Go to Step 8.

STEP 8. Check combination meter connector C-41 for damage.

Q: Is combination meter connector C-41 in good condition?

YES: Go to Step 9.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the seat belt warning light illuminates normally.

Initial Inspection and Diagnostic Overview|Page 1935 > < Initial Inspection and Diagnostic Overview|Page 1933