Eclipse L4-2.4L SOHC (2004)
Required Special Tool:
-
MB991223: Test Harness Set
STEP 1. Check the operation of each light.
Q: Which light does not illuminate?
position light (LH), tail lights (LH), side marker light (LH) and license plate light: Go to Step 2.
position light (RH), tail lights (RH) and side marker light (RH): Go to Step 4.
tail lights, side marker lights and license plate light: Go to Step 6.
tail lights (LH), side marker light (LH) and license plate light: Go to Step 8.
tail lights (RH) and side marker light (RH): Go to Step 10.
position light (LH): Go to Step 12.
position light (RH): Go to Step 18.
tail light (LH): Go to Step 24.
tail light (RH): Go to Step 30.
rear side marker light (LH): Go to Step 36.
rear side marker light (RH): Go to Step 42.
license plate light: Go to Step 48.
All lights: Refer to Inspection Procedure J-1 "Tail lights do not illuminate normally."
STEP 2. Check front combination light (LH) connector A-26 and front-ECU connector A-10X for damage.
Q: Are front combination light (LH) connector A-26 and front-ECU connector A-10X in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. Refer to Harness connector Inspection. The position light (LH), the tail light (LH), the side marker light (LH)