Eclipse L4-2.4L SOHC (2004)
STEP 35. Check the wiring harness between rear combination light (RH) connector F-09 (terminal 2) and front-ECU connector A-10X
(terminal 8).
NOTE: Also check intermediate connector C-89, junction block connectors C-101 and C-112. If intermediate connector C-89, junction block connector
C-101 or C-112 is damaged, repair or replace the connector as described in Harness connector Inspection.
Q: Is the wiring harness between rear combination light (RH) connector F-09 (terminal 2) and front-ECU connector A-10X (terminal 8) in good
condition?
YES: Replace the rear combination light socket assembly (RH). Check that the tail light (RH) illuminates normally.
NO: Repair the wiring harness. Check that the tail light (RH) illuminates normally.
STEP 36. Check the rear side marker light bulb (LH).
1. Remove the rear side marker light bulb (LH).
2. Check that the rear side marker light bulb (LH) is not broken.
Q: Is the rear side marker light bulb (LH) in good condition?
YES: Go to Step 37.
NO: Replace the rear side marker light bulb (LH). Check that the rear side marker light (LH) illuminate normally.
STEP 37. Measure at rear side marker light (LH) connector F-20 in order to check the ground circuit to the license plate lights.