Eclipse L4-2.4L SOHC (2004)
Interior Lights Circuit Part 2
CIRCUIT OPERATION
The ETACS-ECU operates the dome light according to the following signals:
-
Ignition switch (IG1): ON or OFF
-
Key reminder switch: ON or OFF
-
Front door switch: ON or OFF
-
Driver's door lock actuator switch: LOCK or UNLOCK
TECHNICAL DESCRIPTION (COMMENT)
Is the dome light does not flash normally, a burned-out dome light bulb, the input circuits from the switches described in "CIRCUIT OPERATION", the
power supply line to the switches or the ETACS-ECU may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of the key reminder switch
-
Malfunction of the door switch
-
Malfunction of the driver's door lock actuator switch
-
Malfunction of the dome light
-
Malfunction of the ETACS-ECU
-
Damaged harness wires or connectors
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set