Eclipse L4-2.4L SOHC (2004)
STEP 2. Check ETACS-ECU connector C-119 for damage.
Q: Is ETACS-ECU connector C-119 in good condition?
YES: Go to Step 3.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the equipment, which are described in "CIRCUIT OPERATION",
work normally, the input signal from the ignition switch (ACC) should be normal.
STEP 3. Check the wiring harness between ETACS-ECU connector C-119 (terminal 4) and the ignition switch (ACC).
NOTE: Also check intermediate connector C-89 and junction block connector C-112. If intermediate connector C-89 or junction block connector C-112
is damaged, repair or replace the connector as described in Harness Connector Inspection.