Eclipse L4-2.4L SOHC (2004)
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the sunroof operates normally, it indicates that a correct signal is sent
from the sunroof switch.
STEP 3. Check the wiring harness between sunroof motor assembly connector D-06 (terminal 10) and ETACS-ECU connector C-118 (terminal
59).
NOTE: Also check intermediate connectors C-31 and joint connector C-78. If intermediate connector C-31 or joint connector C-78 is damaged, repair
or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between sunroof motor assembly connector D-06 (terminal 10) and ETACS-ECU connector C-118 (terminal 59) in good
condition?
YES: Go to Step 4.