mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 181 > < Symptom Related Diagnostic Procedures
Page 2
background image

TROUBLESHOOTING HINTS

-

Malfunction of the remote controlled radio switch

-

Malfunction of the radio and cd player

-

Malfunction of the clock spring

-

Damaged wiring harness or connectors

DIAGNOSIS

STEP 1. Check the remote controlled radio switch power supply circuit at the clock spring connector C-84.

1. Disconnect the clock spring connector C-84.
2. Turn the ignition switch to "ON" position.

3. Measure the voltage between terminal 2 and ground.

-

The measured value should be approximately 5 volts (battery positive voltage).

Q: Does the measured voltage correspond with this range?

YES: Go to Step 4.

NO: Go to Step 2.

Symptom Related Diagnostic Procedures|Page 181 > < Symptom Related Diagnostic Procedures