mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2297 > < Initial Inspection and Diagnostic Overview|Page 2295
Page 233
background image

Q: Is the wiring harness between rear side marker light (LH) connector F-20 (terminal 1) and ground in good condition?

YES: Replace the rear side marker light socket (LH). Check that the rear side marker light (LH) illuminate normally.

NO: Repair the wiring harness. Check that the rear side marker light (LH) illuminate normally.

STEP 40. Check rear side marker light (LH) connector F-20 and front-ECU connector A-10X for damage.

Q: Are rear side marker light (LH) connector F-20 and front-ECU connector A-10X in good condition?

YES: Go to Step 41.

NO: Repair or replace the connector. Refer to Harness connector Inspection. Check that the rear side marker light (LH) illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2297 > < Initial Inspection and Diagnostic Overview|Page 2295