Eclipse V6-3.0L SOHC (2003)
STEP 13. Check the wiring harness between front passenger's door lock actuator switch connector E-07 (terminal 2) and ETACS-ECU
connector C-117 (terminal 43).
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between front passenger's door lock actuator switch connector E-07 (terminal 2) and ETACS-ECU connector C-117 (terminal
43) in good condition?
YES: Replace the ETACS-ECU. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock actuator switch should be normal.
NO: Repair the wiring harness. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the front
passenger's door lock actuator switch should be normal.
Inspection Procedure P-6
The ETACS-ECU Does Not Receive Any Signal From The Door Lock Switch (Incorporated In Power Window Main Switch And Power
Window Sub Switch).
