mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2548 > < Initial Inspection and Diagnostic Overview|Page 2546
Page 484
background image

Trunk Lid Latch Switch (Eclipse Spyder)

STEP 1. Check the liftgate latch switch <ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER>. 

Q: Is the liftgate latch switch <ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER> in good condition?

YES:
-

Vehicles with theft-alarm system: Go to Step 2.

-

Vehicles without theft-alarm system: Go to Step 5.

NO: Replace the liftgate latch switch <ECLIPSE> or trunk lid latch switch <ECLIPSE SPYDER>. The input signal from the liftgate latch switch
<ECLIPSE> or the trunk lid latch switch <ECLIPSE SPYDER> should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.

STEP 2. Check the trunk lid latch switch ground circuit at liftgate latch switch connector F-16 <ECLIPSE-Vehicle with theft-alarm system> or
the trunk lid latch switch connector F-16 <ECLIPSE SPYDER-Vehicle with theft-alarm system>.

Initial Inspection and Diagnostic Overview|Page 2548 > < Initial Inspection and Diagnostic Overview|Page 2546