Eclipse V6-3.0L SOHC (2003)
Stabilizer Bar: Service and Repair
Front
REMOVAL AND INSTALLATION
REMOVAL SERVICE POINT
<<A>> STABILIZER BAR REMOVAL <3.0L ENGINE>
Turn the steering wheel to the right to remove the left end of the stabilizer bar.
INSTALLATION SERVICE POINT
>>A<< STABILIZER BAR/BUSHING/STABILIZER BAR BRACKET INSTALLATION
Position the stabilizer bar so that the left side identification mark is at the shown position, and tighten the stabilizer bar bracket mounting bolt.
INSPECTION
^
Check the bushing for wear and deterioration.
^
Check the stabilizer bar for deterioration or damage.
^
Check all bolts for condition and straightness.