Eclipse V6-3.8L (6G75) (2006)
1. Turn the ignition switch to the "ON" position.
2. Check whether the combination meter-related DTC is set.
3. Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES: Diagnose the combination meter (Refer to Diagnosis in Instrument Cluster/Carrier).
NO: Go to Step 3.
STEP 3. Use scan tool MB991958 to select "ECU COMM Check" on the SWS monitor display.
Check the ETACS-ECU.
CAUTION: Connect special tool MB991910 before connecting special tool MB991812. Be sure to connect special tool MB991806 after turning on
special tool MB991824.