Eclipse V6-3.8L (6G75) (2006)
Q: A power window (RH) cannot work by using the power window main switch. Can you operate the power window (RH) by using the power window
sub switch?
YES: Go to Step 2.
NO: Refer to Symptom Chart before resolving this trouble. See: Symptom Related Diagnostic Procedures/Symptom Chart
STEP 2. Check power window main switch connector E-14 and power window motor (RH) connector E-03 for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are power window main switch connector E-14 or power window motor (RH) connector E-03 in good condition?
YES: Go to Step 3.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. When the power window main switch is operated, the
power window (RH) should raise and lower normally.