Eclipse V6-3.8L (6G75) (2006)
Interior Light Circuit
CIRCUIT OPERATION
The ETACS-ECU operates the dome light according to the following signals:
-
Ignition switch (IG1): ON or OFF
-
Key reminder switch: ON or OFF
-
Door switches: ON or OFF
-
Driver's door lock actuator switch: ON or OFF
-
Interior light loaded signal: ON
TECHNICAL DESCRIPTION (COMMENT)
If the dome light does not illuminate normally, a burned-out dome light bulb, the input circuits from the switches described in "CIRCUIT
OPERATION", the power supply line to the switches or the ETACS-ECU may be defective.
TROUBLESHOOTING HINTS
-
Trouble in input signal system
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
-
The ETACS-ECU may be defective
DIAGNOSIS
Required Special Tools:
-
MB991223: Harness Set
-
MB992006: Extra Fine Probe
-
MB991958: Scan Tool (MUT-III Sub Assembly)
-
MB991824: V.C.I.
-
MB991827: MUT-III USB Cable
-
MB991910: MUT-III Main Harness A