Eclipse V6-3.8L (6G75) (2006)
/Page-1492373.png)
Remove the turn-signal light and lighting switch and windshield wiper and washer switch. Then check continuity between the switch body terminals.
Q: Is the column switch body in good condition?
YES: Go to Step 4.
NO: Replace the column switch body. If the wiper interval can be adjusted normally, it indicates that the variable intermittent wiper control switch
should send a signal to the ECU.
STEP 4. Check ETACS-ECU connector C-218 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is ETACS-ECU connector C-218 in good condition?
YES: Go to Step 5.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the wiper interval can be adjusted normally, that the
variable intermittent wiper control switch should send a signal to the ECU.
