Eclipse V6-3.8L (6G75) (2006)
STEP 1. Check key reminder switch connector C-310 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is key reminder switch connector C-310 in good condition?
YES: Go to Step 2.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. If the functions described in "CIRCUIT
OPERATION" work normally, the input signal from the key reminder switch should be normal.
STEP 2. Check the key reminder switch.
Disconnect key reminder switch connector C-310. Then check continuity between terminals.
Q: Is the key reminder switch in good condition?
YES: Go to Step 3.
NO: Replace the key reminder switch. If the functions described in "CIRCUIT OPERATION" work normally, the input signal from the key
reminder switch should be normal.
STEP 3. Check the ground circuit to the key reminder switch. Measure the resistance at key reminder switch connector C-310.