Eclipse V6-3.8L (6G75) (2006)
2. Remove the lock pin bolt <Front> or lock pin and brake hose clamp <Rear>. Pivot the caliper assembly and hold it with wires.
3. Remove the following parts from the caliper support.
1. Pad assembly
2. Pad and wear indicator assembly or Pad assembly
3. Shim
4. Clip
4. In order to measure the brake drag force after pad installation, measure the rotary-sliding resistance of the hub with the pads removed.
5. Install the pads and caliper assembly, and then check the brake drag force.