mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine - Ticking Noise|Page 1487 > < Engine - Ticking Noise
Page 2
background image

WARRANTY INFORMATION

Procedure

Refer to the 2006 Eclipse service manual for details.

1.

Start the engine and confirm there is a ticking (sounds like a loud valve lifter) noise. If ticking noise is heard, confirm the location of the noise (left
or right engine bank).

2.

Record the customer's audio settings.

3.

Be sure the windows and the sunroof are completely closed.

4.

Remove the strut tower bar.

5.

Remove the battery and the battery tray.

6.

Drain the coolant and dispose of properly.

Go to PROCEDURE A if the ticking noise is coming from the right (rear) engine bank.

Go to PROCEDURE B if the ticking noise is coming from the left (front) engine bank.

PROCEDURE A - RIGHT (REAR) ENGINE BANK:

1.

Remove the air cleaner intake.

2.

Remove the intake manifold plenum cover.

3.

Disconnect the engine harness from the intake manifold plenum. Remove the plenum, and discard the gasket.

NOTE:

Place a cloth over the intake manifold to prevent possible damage during repair.

Engine - Ticking Noise|Page 1487 > < Engine - Ticking Noise