Eclipse V6-3.8L (6G75) (2006)
/Page-1639015.png)
1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch "ON" position.
3. Read the MFI system diagnostic trouble code.
4. Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES: Diagnose the MFI system by referring to GROUP 13A, MFI Diagnosis - Diagnostic Trouble Code Chart P.13A-41 <2.4L ENGINE> or
GROUP 13B, MFI Diagnosis - Diagnostic Trouble Code Chart P.13B-43 <3.8L ENGINE>.
NO: Go to Step 4.
STEP 4. Check multi-center display unit connector C-06 and ECM <M/T> or PCM <A/T> connector B-18 for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are multi-center display unit connector C-06 and ECM <M/T> or PCM <A/T> connector B-18 in good condition?
YES: Go to Step 5.
