Eclipse V6-3.8L (6G75) (2006)
2. Disconnect joint connector (3) C-03, and measure the resistance at the wiring harness side of joint connector (3) C-03.
3. Measure the resistance between joint connector (3) terminal 3 and body ground.
OK: 1 k ohms or more
4. Measure the resistance between joint connector (3) terminal 14 and body ground.
OK: 1 k ohms or more
Q: Does the resistance measure 1 k ohms or more?
YES: Go to Step 7.
NO: Go to Step 10.
STEP 7. Check the CAN line between joint connector (3) and the data link connector for short to ground. Measure the resistance at joint
connector (3) C-03.
CAUTION: Disconnect the negative battery terminal.
1. Disconnect the negative battery terminal.