Eclipse V6-3.8L (6G75) (2006)
1. Disconnect the negative battery terminal.
2. Disconnect joint connector (3) C-03, and measure the resistance at the wiring harness side of joint connector (3) C-03.
3. Measure the resistance between joint connector (3) terminals 3 and 14.
OK: 1 k ohms or more
Q: Is the check result normal?
YES: Go to Step 7.
NO: Go to Step 11.
STEP 7. Check the CAN_H and L lines between joint connector (3) and the data link connector for a short circuit. Measure the resistance at
joint connector (3) C-03.
1. Disconnect the negative battery terminal.
2. Disconnect joint connector (3) C-03, and measure the resistance at the wiring harness side of joint connector (3) C-03.