Eclipse V6-3.8L (6G75) (2006)
Throttle Body: Service and Repair
Removal and Installation
THROTTLE BODY ASSEMBLY
REMOVAL AND INSTALLATION
Pre-Removal Operation And Post-Installation Operation
Removal Steps 1 - 5
CAUTION
-
When the throttle body assembly replacement is performed, use scan tool MB991958 to initialize the learning value (Refer to Initialization
Procedure for Learning Value in MFI Engine).
-
Do not loosen the fixing screws for the resin cover of throttle body assembly. If the screws are loosened, the sensor incorporated in the resin cover
becomes misaligned and the throttle body can not work normally.
INSTALLATION SERVICE POINTS
>>A<<THROTTLE BODY GASKET INSTALLATION
CAUTION: Poor idling etc. may result if the throttle body gasket is installed incorrectly.