Eclipse V6-38L (6G75) Knock Sensor Removal and Installation Instructions
Use special tool MD998773 to tighten the knock sensor to the specified torque in the same manner as removal.
Tightening torque: 23 ± 2 Nm (17 ± 1 ft-lb)
>>B<< CLIP INSTALLATION
1. Install the clip to the the timing belt front upper cover as shown.
2. Tighten the clip mounting bolt to the specified torque.
Tightening torque: 11 ± 1 Nm (98 ± 8 ft-lb)