Eclipse FWD L4-1997cc 2.0L DOHC MFI (1997)
<A> HEATED OXYGEN SENSOR <FRONT>/HEATED OXYGEN SENSOR <REAR> DISCONNECTION The exhaust manifold threads must
be cleaned with an 18 mm (.7 in.) x 1.5 + 6E tap after the heated oxygen sensor has been disconnected.
INSTALLATION SERVICE POINT
>A< HEATED OXYGEN SENSOR <FRONT>/HEATED OXYGEN SENSOR <REAR> CONNECTION
If reusing the original sensor, coat the sensor threads with an antiseize compound such as Loctite 771-64 or equivalent. New sensors have
compound on the threads and do not require an additional coating.
