Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Caliper Support
3. Remove the following parts from caliper support.
1. Pad and wear indicator assembly
2. Pad assembly
3. Clip
4. Outer shim (stainless)
5. Outer shim (coated with rubber)
6. Inner shim (stainless)
7. Inner shim (coated with rubber)
4. Take out the drive shaft.
5. Set the special tool to the front hub assembly as shown in the illustration.
6. Measure hub torque (A) with pads removed to measure brake drag torque. Torque value will be used later to calculate brake drag force with the
pads installed.
NOTE: Tighten the nuts in order to secure the disc to the hub.
7. Securely attach the pad clip to the caliper support.