Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Temperature Sensor (Gauge): Testing and Inspection
1. Drain the engine coolant.
2. Remove the engine coolant temperature gauge unit.
3. Immerse the unit in 70°C (158°F) water to measure the resistance.
Standard value: 104 ± 13.5 Ohm
4. If within the standard value, the engine coolant temperature gauge unit is OK.
If not within the standard value, replace the engine coolant temperature gauge unit.
5. After checking, apply the specified adhesive around the thread of engine coolant temperature gauge unit.
Specified sealant: 3M Adhesive Nut Locking No.4171 or equivalent
6. Fill engine coolant.
