Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
CAUTION: Tighten uniformly, otherwise the rocker arms will not be straight.
>C< Camshaft oil seal installation.
Use the special tool to drive the camshaft oil seal into position carefully.
>D< Camshaft position sensing cylinder/ camshaft position sensor support installation.
1. Install the camshaft position sensing cylinder to the end of the camshaft as shown in the illustration.
2. Install the camshaft position sensor support.
3. Check that the identification paint on the camshaft position sensing cylinder is pointing in the same direction as the camshaft position sensor
installation direction when the camshaft is at the No. 1 compression TDC position.
Post-installation Operation:
-
Timing Belt Front Upper Cover Installation.
-
Engine Adjustment.
