Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Closed Throttle Position Switch: Testing and Inspection
1. Disconnect the throttle position sensor connector.
2. Measure the resistance between the throttle position sensor side connector terminal 1 and terminal 4.
Standard value: 3.5-6.5 kohms
3. Measure the resistance between the throttle position sensor side connector terminal 2 and terminal 4.
4. If the resistance is outside the standard value, or it it doesn't change smoothly, replace the throttle position sensor.
NOTE: Always adjust the throttle position sensor after replacement.