Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
Fuel Pressure Release: Service and Repair
CAUTION: When removing the fuel pipe, hose, etc., since fuel pressure in the fuel pipe line is high, do the following operation so as to release fuel
pressure in the line and prevent fuel from running out.
1. Remove the rear seat cushion.
2. Remove the protector to disconnect the fuel pump connector.
3. Start the engine and let it run until it stops naturally, turn off the ignition switch.
4. Connect the fuel pump connector to install the protector.
5. Install the rear seat cushion.
