Eclipse GS-T L4-1997cc 2.0L DOHC Turbo MFI (1998)
the glass.
Specified adhesive:
3M ATD Part No.8609 Super Fast Urethane or equivalent
NOTE: Cut the nozzle tip of the sealant gun into a V shape to facilitate adhesive application.
4. After application of the adhesive, force the glass lightly and evenly onto the body for complete fitting.
5. Remove the adhesive from around and on the glass and body surfaces using a spatula and wipe the surfaces clean.
6. After the work (installation of the glass), allow the glass to stand until the adhesive hardens.
CAUTION: When using an infrared lamp or other means for quicker hardening, keep the surface temperature 60° C (140° F) or lower.
7. After about 30 minutes or more following bonding of the quarter window glass to the body, check for water leaks.
CAUTION:
1. If the vehicle is to be moved, do so gently.
2. When checking for water leaks, do not squeeze the hose end.