Eclipse GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
Fuel Pressure Release: Service and Repair
When removing the fuel pipe, hose, etc., since fuel pressure in the fuel pipe line is high, do the following operation so as to release fuel pressure in the
line and prevent fuel from running out.
1. Remove the rear seat cushion.
2. Remove the protector to disconnect the fuel pump connector.
3. Start the engine and let it run until it stops naturally, turn off the ignition switch.
4. Connect the fuel pump connector to install the protector.
5. Install the rear seat cushion.
