Eclipse GS-T FWD L4-1997cc 2.0L DOHC Turbo MFI (1997)
2. Make sure that there is continuity [approx. 12 ohm at 20°C (68°F)] between terminal 3 and terminal 4 on the heated oxygen sensor connector.
3. If there is no continuity, replace the heated oxygen sensor.
NOTE
1. If the scan tool dose not display the standard value although no abnormality is found by the above mentioned continuity test and harness check,
replace the heated oxygen sensor (rear).
2. For removal and installation of the oxygen sensor, refer to Exhaust System.
