Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
YES: Replace the multi-center display. The multi-center display should work normally.
NO: Go to Step 11.
STEP 11. Check the multi-center display connector C-09 for damage.
Q: Is multi-center display connector C-09 in good condition?
YES: Go to Step 12.
NO: Repair or replace it. Refer to Harness Connector Inspection. The multi-center display should work normally.
STEP 12. Check the harness wires between multi-center display connector C-09 and ignition switch (IG1).
NOTE: After checking joint connector C-78 and junction block connector C-111 and C-112, check the wires. If joint connector C-78 and junction block
connector C-111 and C-112 are damaged, repair or replace them. Refer to Harness Connector Inspection.
Q: Is the harness wires between multi-center display connector C-09 and ignition switch (IG1) in good condition?