Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 5. Check the wiring harness between ETACS-ECU connector C-119 and the ground.
NOTE: Also check junction block connector C-108. If junction block connector C-108 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-119 and the ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. The system should communicate with the SWS monitor kit normally.
STEP 6. Check ETACS-ECU connector C-118 and data link connector C-29 for damage.
Q: Are ETACS-ECU connector C-118 and data link connector C-29 in good condition?
YES: Go to Step 7.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The system should communicate with the SWS monitor kit normally.