Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
Q: Does the measured voltage correspond with this range?
YES: Go to Step 6.
NO: Go to Step 4.
STEP 4. Check column switch connector C-86 for damage.
Q: Is column switch connector C-86 in good condition?
YES: Go to Step 5.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. The system should communicate with the column switch (column-ECU)
normally.
STEP 5. Check the wiring harness between column switch connector C-86 and the battery.
NOTE: Also check joint connector C-78 and intermediate connector C-89. If joint connector C-78 or intermediate connectors C-89 is damaged, repair
