Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 3. Check ETACS-ECU connector C-119 for damage.
Q: Is ETACS-ECU connector C-119 in good condition?
YES: Go to Step 4.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the central door locking system works normally.
STEP 4. Check the wiring harness between ETACS-ECU connector C-119 and fusible link (1).
NOTE: Also check junction block connector C-113 and intermediate connector C-89. If junction block connector C-113 or intermediate connectors
C-89 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-119 and fusible link (1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the central door locking system works normally.