Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 16. Check the wiring harness between power window relay connector C-116 and power window main switch connector E-12.
NOTE: Also check junction block connector C-111 and intermediate connector C-91. If junction block connector C-111 or intermediate connectors
C-91 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between power window relay connector C-116 and power window main switch connector E-12 in good condition?
YES: Replace the ETACS-ECU. Check that the power windows work normally.
NO: Repair the wiring harness. Check that the power windows work normally.
Inspection Procedure D-2
Power Window: The Power Window Timer does not Work Normally.
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."
Power Window Timer Function Circuit