mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2047 > < Initial Inspection and Diagnostic Overview|Page 2045
Page 121
background image

STEP 4. Check the wiring harness between windshield wiper motor connector A-03 and front-ECU connector A-11X.

NOTE:  Also check intermediate connector C-06. If intermediate connectors C-06 is damaged, repair or replace the connector as described in Harness
Connector Inspection.

Q: Is the wiring harness between windshield wiper motor connector A-03 and front-ECU connector A-11X in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the windshield wiper operates normally when the windshield wiper switch is moved to each position.

Inspection Procedure G-4

Windshield Wiper and Washer: Windshield Wiper does not Stop at the Predetermined Park Position.

Initial Inspection and Diagnostic Overview|Page 2047 > < Initial Inspection and Diagnostic Overview|Page 2045