Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
Q: Does the measured voltage correspond with this range?
YES: Go to Step 5.
NO: Go to Step 3.
STEP 3. Check windshield wiper motor connector A-03 for damage.
Q: Is windshield wiper motor connector A-03 in good condition?
YES: Go to Step 4.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the windshield wiper works normally.
STEP 4. Check the wiring harness between windshield wiper motor connector A-03 and the ignition switch (ACC).
NOTE: Also check intermediate connector C-94, junction block connectors C-111 and C-112. If intermediate connectors C-94 or junction block
connector C-111 or C-112 is damaged, repair or replace the connector as described in Harness Connector Inspection.