Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 23. Check the wiring harness between position light (RH) connector A-32 and front-ECU connector A-10X.
NOTE: Also check intermediate connectors C-06 and C-89. If intermediate connector C-06 or C-89 is damaged, repair or replace the connector as
described in Harness connector Inspection.
Q: Is the wiring harness between position light (RH) connector A-32 and front-ECU connector A-10X in good condition?
YES: Replace the front combination light socket (RH). Check that the position light (LH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (LH) illuminates normally.
STEP 24. Check the stop/tail light bulb (LH).
1. Remove the stop/tail light bulb (LH).
2. Check that the stop/tail light bulb (LH) is not broken.
Q: Is the stop/tail light bulb (LH) in good condition?
YES: Go to Step 25.
NO: Replace the stop/tail light bulb (LH). Check that the tail light (LH) illuminates normally.