mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2122 > < Initial Inspection and Diagnostic Overview|Page 2120
Page 196
background image

STEP 44. Check rear side marker light (RH) connector F-11 for damage.

Q: Is rear side marker light (RH) connector F-11 in good condition?

YES: Go to Step 45.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the rear side marker light (RH) illuminate normally.

STEP 45. Check the wiring harness between rear side marker light (RH) connector F-11 and ground.

Q: Is the wiring harness between rear side marker light (RH) connector F-11 and ground in good condition?

YES: Replace the rear side marker light socket (RH). Check that the rear side marker light (RH) illuminate normally.

NO: Repair the wiring harness. Check that the rear side marker light (RH) illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2122 > < Initial Inspection and Diagnostic Overview|Page 2120