Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 26. Check combination meter connector C-41 and ETACS-ECU connector C-119 for damage.
Q: Are combination meter connector C-41 and ETACS-ECU connector C-119 in good condition?
YES: Go to Step 27.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.
STEP 27. Check the wiring harness between combination meter connector C-41 and ETACS-ECU connector C-119.
NOTE: Also check junction block connector C-108. If junction block connector C-108 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-41 and ETACS-ECU connector C-119 in good condition?
YES: Replace the combination meter. Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.