mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2198 > < Initial Inspection and Diagnostic Overview|Page 2196
Page 272
background image

STEP 11. Check the wiring harness between luggage compartment light connector F-21 and ETACS-ECU connector C-119.

NOTE:  Also check junction block connector C-101. If junction block connector C-101 is damaged, repair or replace the connector as described in
Harness Connector Inspection.

Q: Is the wiring harness between luggage compartment light connector F-21 and ETACS-ECU connector C-119 in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the luggage compartment lights illuminate normally.

STEP 12. Check luggage compartment light connectors F-21 and ETACS-ECU connector C-118 for damage.

Q: Are luggage compartment light connector F-21 and ETACS-ECU connector C-118 in good condition?

YES: Go to Step 13.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the luggage compartment lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2198 > < Initial Inspection and Diagnostic Overview|Page 2196